Zaxcom URX50

Receiver
Receiver RF Channels: 1
Frequency selection: 20 discrete channels
Diversity method: antenna switching
RF Modulation: proprietary digital method
URX50-L Tuning Range: 500 - 638 MHz
URX50-H Tuning Range: 542 - 698 MHz
RF Frequency Step: 100 KHz
RF Signal Bandwidth: 200 KHz
Channel Separation: 300 KHz (300Khz to 500kHz Transmission / Modulation dependent)
Sensitivity: -100 dBm
RF channel voting: 2 or 3 channel auto selection
Modulation decode: Mono, Stereo, XR and ZHD96

Antenna
Connection: Integrated
Type: ¼ wavelength steel cable whip
Additional Antenna: diversity headphone cable

GUI
Control: via embedded data on RF Channel #1

Receiver Audio
Format: Mono headphone analog output
Dynamic Range: 110 dB
Distortion: 0.002%
Frequency Range: 20Hz to 16kHz
DAC Bit-depth: 24 bits
Audio Delay: 0 to 200 mS
1 KHz Notch Filter: 60 dB attenuation / 5 Hz Bandwidth

Headphone Audio Output
Impedance: 16 ohms
Output Power: 100 mW
Output Type: Headphone driver
Output connector: 3.5 mm
Mode: 1-Channel unbalanced

Speaker Audio Output
Output Power: 200 mW
Speaker: 2” permanent magnet
Speaker Frequency Response: 200Hz to 16 KHz

Timecode
Visible display on OLED

Power
Internal Power: 3 AA Batteries
Li-Ion Battery Life: Up to 11 hours
NiMH Battery Life: Up to 10 hours
Alkaline Battery life: Up to 7 hours
Power Consumption: .8 watts

Misc.
Weight: 4.5 oz without batteries
Dimensions: 4.1” x 2.5” x .9”
Display: Graphic OLED Panel